Menu Close

Reply To: The Sarcastic, Coffee, Technology, Music, and Movie, Club

Home Forums SCTMMC Forum The Sarcastic, Coffee, Technology, Music, and Movie, Club Reply To: The Sarcastic, Coffee, Technology, Music, and Movie, Club

#192326
RattFink!
Participant
Offline
Been thanked: 11122 times

So I’ve run into an issue on the RD Bass and could use some advise.  I’ve got a Mojotone Jazz preamp I want to put in it.  I found the pre drilled holes to be a tad bit to small and to far apart.  I’m using a rasp to widen them out and move the up.  I’ll go back with some wood putty and fill the gaps.  Perhapps I should have filled the holes first and re drilled them, not sure what would be better.  But now I’m seeing that the pre routed cavity for the electronics is not deep enough (see pic).  I think I can outline the preamp on the inside and then use a chisel to take off about an 1/8 in of material.  This is my first attempt at building a guitar from a kit, so practical advise is appreciated.  I also don’t have many power tools.

 

RattFink, RattFank, RattFunk, Rattbones

Attachments:
4 users thanked author for this post.

For New Registrations, "Contact Us" and Tell us Your Favorite Movie.